Author Topic: Rh150g3 ohms  (Read 1750 times)

Offline Pat1990

  • Newbie
  • *
  • Posts: 1
    • View Profile
Rh150g3 ohms
« on: May 29, 2016, 02:49:09 PM »
Hello all,

I'm confused regarding my amp, specifically which input to use. There are two parallel output jacks on the back with total mini load of 4 ohms. On the cab there are two jack sockets each showing 4 ohms although one also says 8 ohms above, and the option to switch between stereo or mono. I've got the speaker set to mono as I only have one speaker, speaker cable in the jack socket with 8ohm above and this plugged in to the back of my amp. I think this is correct - any advice? Amp is a randall rh150g3, cab is a randall rs412xjm