Randall Amplifiers Forum

Randall Amplifiers => Randall Solid State Amplifiers => Topic started by: BowerR64 on May 21, 2017, 02:59:04 AM

Title: Randall KH-120 Head schematic?
Post by: BowerR64 on May 21, 2017, 02:59:04 AM
I have a Randall KH-120 head i got cheap off my local craigslist ide like to find a schematic for it and tinker with the gain a little. Maybe remove the clipper LEDs or diodes or roll back the gain structure a little I run it now with the gain knobs at about 8:00

When i turn em up higher the tone gets better thicker fatter but its a little to heavy for my taste if i could roll the gain back some inside i could turn the gain up and get the thicker fatter tone but with a more crunch tone.

Ive read the KH-120 is similar to a few other 120 watt amps the RX maybe a few others that maybe have different styling

Any help would be great!
Title: Re: Randall KH-120 Head schematic?
Post by: nuning on May 04, 2018, 10:21:08 PM
Your information I have read. It is very good. Thank you for this is a good thing.

รูเล็ตออนไลน์ (https://www.gclub69.com/roulette/)